ZINIO logo

Model Airplane News June 2021

Model Airplane News is the brand that started it all back in 1929, and it remains the trusted resource for RC aircraft enthusiasts everywhere. Written for the full spectrum of RC airplane, helicopter, and multirotor fliers—from beginners to seasoned pros—Model Airplane News entertains and informs with on-the-flight line event coverage, impressive flight techniques, detailed flight reports, DIY workshop projects, and much more.

Country:
United States
Language:
English
Publisher:
Air Age Media
Frequency:
Monthly
₹582.76
₹2,549.13
12 Issues

in this issue

1 min
flight plan

IN THIS ISSUE We have lots of great content in this issue. First, we have a Flight Report from Ralph Esposito for an incredible turbo-prop powered T-27 Tucano from Juniaer Modelismo. We also have a great construction article for a fun-scale profile Zero by Dick Sarpolus. It’s quick and easy to build with readily available foam wings (you can order full-size plans at AirAgeStore.com). We also have a close-up look at an amazing giant-scale aerobatic Stearman that our buddy Curtis Switzer has flown at many events. Curtis answers all our questions in this month’s five-page Gallery. INTRO TO AEROBATICS Here in the Northeast, as the cold weather subsides, RC pilots are making ready for the upcoming flying season. It’s a perfect time to get to the flying field and learn to fly. If…

f0004-01
2 min
pilot projects

J-3 CUB Nigel Watson, Martinez, California Nigel built this 76.5-inch-span, Anniversary Edition Piper J3 Cub from a Carl Goldberg kit. The balsa and ply model was designed to fly with a .40 size 2-stroke, but Nigel converted it to electric with a Suppo A4120/6 motor, an 80A speed control, a 4S 4000mAh LiPo, and an APC 13x8E propeller. Nigel also added flaps and a gyro to smooth out any turbulence on those windier days. The grin on his face is for having just completed a successful maiden flight. Nigel says the Cub is a gentle flier and usually cruises the skies above the Diablo Valley Radio Controllers’ runway in the hills above Pittsburg, California. DORNIER MERKUR Scott Kruize, Tukwila, Washington This unusual RC model of the 1921 airliner is an original design and 1/24-scale. Scott…

f0006-01
2 min
hobby hacks

DECAL ALIGNMENT When you’re ready to apply your chosen aircraft markings, it can be hard to properly position and align the decals. I have found that using the sticky side of office notes works great! Use a sharp pair of scissors, make a ruler out of the sticky side (which contours to most surfaces) and you’re on your way to a very sharply dressed plane with almost perfect alignment! John Wolfe, email THROTTLE BELLCRANK With many gasoline-powered engines, the position of the carburetor requires either a thin flexible cable pushrod to move the throttle arm or the installation of a carburetor adaptor block to reposition the arm so a straight-run pushrod can be used. A much simpler method that produces less play than the cable is to use a 90-degree belcrank. I drill a…

f0008-01
2 min
sneak peek! italian f-35a lightning ii

Serving as the backbone of allied airpower for 13 nations, the Lockheed Martin F-35 is a cutting-edge, fifth-generation fighter designed to bring enhanced situational awareness, digital data sharing and seamless connectivity to coalition forces, including Italy. The FACO company in Cameri, Italy, is now assembling and constructing F-35 parts, including the wings and the company is also responsible for maintaining all the F-35s sold in Europe. The first F-35 assembled in Italy flew on September 24, 2015 and was assigned to the 32nd Wing Stormo (Armando Boetto) of the Italian Air Force. THE MODEL The newest addition to the Bertella Models line of all-wood jets designs, the F-35A Lightning II is 1/10-scale, has a 46.5 inch wingspan and is 60.5 inches long. The F-35 is constructed entirely of balsa and plywood, and…

f0010-02
3 min
coachella valley jet jam

It was an event which almost wasn’t. For years, the Coachella Valley Radio Control Club in Thermal, California has hosted its annual Jet Jam in February. The specter of quarantine closures in California cast a pall on the 2021 event. Fortunately, that did not happen with the lifting of restrictions just prior to the 18th annual event. Club officers did a stellar job of scrambling together a show after the restrictions were lifted; the only casualty was a lack of raffle prizes. The Jet Jam is a big deal in a remote location some 25 miles southeast of Palm Springs. It draws participants of all ages from across the west to enjoy the mild winter weather and to fly everything from electric ducted fans to giant scale turbines at an AMA…

f0012-01
1 min
new products

Hitec RCD RDX2 Pro 260W Hitec’s new dual port AC/DC charger provides 260 watts of power with independent, 130-watt circuits, allowing you to charge two packs simultaneously. Pilots flying larger aircraft and helis that use high capacity 4S-6S packs can rely on the RDX2 Pro to quickly charge 4S and 6S packs up to 9 and 5.8 amps respectively. Priced at $174.99, the RDX2 Pro can also convert into a power supply unit to power two individual 5–24 volt devices simultaneously. hitecrcd.com Old School Model Works Kaos 60 Kit The 1970s, Joe Bridi-designed Kaos 60 incorporates modern building techniques to make building it better than ever. Priced at $235.95, the kit is made in the USA and includes premium USA sourced hardware. Based on the original design, the kit has been updated with laser-cut…

f0014-01