Inhoudsopgave van Issue 2 - Raspberry Pi Coding & Projects The Complete Manual

FASTER AND CONNECTED There’s a lot to like about the Raspberry Pi 4: Up to 8GB of on-board memory, a faster quad-core CPU, support for dual 4K displays via a pair of micro-HDMI ports, and more. Let’s take a look at the Pi 4, and see what it’s got under-the-hood. PRICING Since the Raspberry Pi 4 now offers three different versions within the new model, it stands to reason that the pricing for it has changed slightly. The 1GB memory version of the Pi 4 is priced at around £34, depending on where you shop. The 2GB memory version is on sale for around £44, while the top-end, 4GB memory version will set you back in the region of £54. Together with the cost of the Pi itself, you will…

EVERYONE LOVES PI We’ve put together ten possible projects that you could use your Pi 400 with; that will entertain and keep you busy while helping you learn more about coding, the Pi and computing. RETRO COMPUTING With the Pi 400 being very similar to that of the great home computers of the 80s, we thought we’d start these ideas with a simple retro-themed project. Fuse is a ZX Spectrum emulator that’s available for the Raspberry Pi. Install it, and you can enjoy some of the greatest games ever created. STREAM PC GAMES It’s possible to stream any game installed on your powerful gaming PC to a Raspberry Pi. All you need is to ensure that your home network is up to scratch – use Ethernet connections between the two…

The Pico uses MicroPython or C/C++ code in order to communicate with the devices it will be attached to. The code will, when uploaded to the Pico, run a specific set of instructions depending on the electronics that are soldered to the Pico. For example, in MicroPython, with an LED attached to the Pico, you would initialise and import the Pin and Timer modules, tell the Pico which GPIO the LED is attached to, then setup a routine that will use the Timer function to send a signal to the LED – let’s say every couple of seconds. The end result would be a blinking LED, which goes on and off every two seconds. Naturally, the more complex the electronics attached to the Pico are, then the more complex the…

An SBC, or Single-Board Computer, is a complete computer system that’s built on a single piece of circuit board; consisting of memory, storage and input and output ports. The Raspberry Pi is a prime example of a modern SBC, and the one that has easily become the most popular. However, there are a number of other SBCs available that vary in size, capacity, performance, price and expandability. Some of them are x86-based, which means they’re basically very small PCs on which you can install Windows 10; others utilise different makes of processor or microprocessors and offer a varied number of operating systems that will work on them, such as Android or Linux. While the Raspberry Pi is the SBC that offers some of the best opportunities in terms of project…

3.14159265358979… Sources: The Raspberry Pi Foundation, The Guardian, readwrite.com, Popular Mechanics, CNN, BBC.…

SETTING UP WITH NOOBS NOOBS (New Out Of Box Software) is a program used to make setting up a Raspberry Pi simple. You can buy SD Cards with NOOBS preinstalled, but here we’ll look at how to format your SD Card and install NOOBS using a Windows computer. STEP 1 We’re going to use a utility called SD Card Formatter to erase the SD Card with correct formatting. You can download this app from https://www.sdcard.org/downloads/formatter/eula_windows/index.html. Click the Accept button to start the download of the latest version of the software. Extract the software, and double-click the executable to install and run the app. STEP 2 We’re going to use an 8GB SD Card to install the operating system on our Raspberry Pi. The card needs to be formatted, which will…

CUSTOM TERMINAL The Terminal gives you access to the command line, where the real power of the Linux OS lies. Getting used to the Terminal is key to mastering the Pi and your projects. STEP 1 Start Terminal by clicking the Terminal icon in the Application Launch Bar. You can also start Terminal by pressing Control-Alt-T or choosing Menu > Accessories > Terminal. Terminal emulates the old style video terminals from before desktop interfaces; so by default it displays bright (mostly green) on a black background. STEP 2 The first thing most people overlook is the ability to run multiple terminals at once in different tabs. Choose File > New Tab (Shift-Control-T) to create a new tab. Navigating multiple directories simultaneously can be a challenge in Terminal and tabs makes…

EDITING CODE You will eventually reach a point where you have to move on from inputting single lines of code into the Shell. Instead, the IDLE Editor will allow you to save and execute your Python code. STEP 1 First, open the Python IDLE Shell and when it’s up, click on File > New File. This will open a new window with Untitled as its name. This is the Python IDLE Editor and within it you can enter the code needed to create your future programs. STEP 2 The IDLE Editor is, for all intents and purposes, a simple text editor with Python features, colour coding and so on; much in the same vein as Sublime. You enter code as you would within the Shell, so taking an example from…

FUNKY FUNCTIONS A function is a command that you enter into Python to do something. It’s a little piece of self-contained code that takes data, works on it and then returns the result. STEP 1 It’s not just data that a function works on. They can do all manner of useful things in Python, such as sort data, change items from one format to another and check the length or type of items. Basically, a function is a short word that’s followed by brackets. For example, len(), list() or type(). STEP 2 A function takes data, usually a variable, works on it depending on what the function is programmed to do and returns the end value. The data being worked on goes inside the brackets, so if you wanted to…

DEBUGGING Errors in code are called bugs and are perfectly normal. They can often be easily rectified with a little patience. The important thing is to keep looking, experimenting and testing. Eventually your code will be bug free. STEP 1 Code isn’t as fluid as the written word, no matter how good the programming language is. Python is certainly easier than most languages but even it is prone to some annoying bugs. The most common are typos by the user and whilst easy to find in simple dozen-line code, imagine having to debug multi-thousand line code. STEP 2 The most common of errors is the typo, as we’ve mentioned. The typos are often at the command level: mistyping the print command for example. However, they also occur when you have…

ADVENTURE.PY The Adventure game uses just the Time module to begin with, creating pauses between print functions. There’s a help system in place to expand upon, as well as the story itself. Adventure Time This, as you can see, is just the beginning of the adventure and takes up a fair few lines of code. When you expand it, and weave the story along, you’ll find that you can repeat certain instances such as a chance meeting with an enemy or the like. We’ve created each of the two encounters as a defined set of functions, along with a list of possible choices under the cmdlist list, and cmd variable, of which is also a defined function. Expanding on this is quite easy, just map out each encounter and choice…

CREATING FILES Once you learn to recognise the files and directories that make up Raspbian OS, it’s time to discover how to make your own. Knowing how to make, edit and delete files and directories is essential if you want to make your own projects. STEP 1 We’re going to create a file using a command called Touch. Touch is an interesting command that reaches out to a file, or directory, and updates it (this changes the system time as if you’d just opened the file). You can see Touch in access using “ls –l” and checking the time next to a directory (such as Scratch). STEP 2 Now enter: touch Scratch and ls–l again and notice that the time has changed. It now matches the current time. You might…

OWNER AND PRIVILEGE Each user account in Linux is an owner of a section of the filesystem: their Home area. Within this area, they do what they like (within reason), as they have owner privileges. Elsewhere though, they usually just have read-only privileges. STEP 1 If you followed the previous tutorial you should now have two accounts on your Raspberry Pi. One called “pi” and the other with a name (Lucy in our case). An essential aspect of Linux is the idea of file and directory ownership; who owns, and has access, to what. You need a test file so enter: touch testfile. STEP 2 Now enter: ls –l and let’s have a good look at the default permissions file. Our testfile.txt files starts with the text “-rw-r--r—“. Start with the…

IN, OUT, LINUX ALL ABOUT Everything on a computer is about input and output. You input things into the computer (press keys, move the mouse) and it makes calculations and outputs content (changes the display, makes a noise, for example). STEP 1 When you enter commands into Linux (in the command line), you are using standard input and output. This is so obvious that most people don’t even think about it. You enter commands using the keyboard (that’s input) and it responds to the screen (output). This is the regular way of doing it, which is why it’s “standard input and output” (often called “stdin” and “stdout” for short). STEP 2 As far as the computer is concerned, input and output can be to and from a whole range of…

TV HAT In this tutorial, we’re using the Raspberry Pi TV HAT as sold by The Pi Hut (https://thepihut.com/products/raspberry-pi-tv-hat?variant=13539182673982). It’s a Sony CXD2880 TV Tuner supporting DVB-T and 2nd-gen DVB-T2 standards. STEP 1 The Raspberry Pi TV HAT is compatible with the Pi Zero, Pi 3 A+ and B+ models. The kit comes with everything you need to connect the HAT to your RPi, including spacers, screws and the 40-pin header. Begin by opening the box and spreading the contents out on a clear area. STEP 2 Start by connecting the 40-pin header to the 40-pin GPIO on top of your Raspberry Pi. Now take the spacers and screws and fit them to the corresponding holes in the corners of the main Raspberry Pi and the TV HAT; use three…

GOING RETRO The Raspberry Pi makes for an amazing retro gaming computer. With it you’re able to emulate and play the classic home computers, consoles and arcade machines that brought us so much joy back in the day. Thankfully, the processing power of most of the systems of the past is well within the capabilities of the Raspberry Pi’s processor. There are a few examples that don’t run too well, such as a PS2, or those systems that utilised a specialised 3D component, but on the whole, there’s likely to be a fully working emulator, available for the Pi, that covers the home computer, console, or arcade that you remember playing. RetroPie is the foremost retro gaming project available for the Raspberry Pi. It’s a set of modules that are…

IT’S RAINING PI, HALLELUJAH! Weather stations have been available to the project minded public since long before the Raspberry Pi entered the scene, but thanks to the Pi’s unique specifications, a new generation of weather station has emerged; and they’re really quite remarkable. As with a lot of Raspberry Pi projects, the market has become flooded with various hardware, kits, and HATs that will enable you to set up a simple, or complex, weather station. The more experienced weather station and Raspberry Pi user will probably lean toward buying in the components individually, as opposed to an entire kit, but for the rest of us the kit-form versions are an excellent start to a project that can quickly grow over time. WHY? With our smart devices connected to everything around…

There’s some amazing gadgets and gizmos out there for all your tech gear. From carry bags to computer stands, from phone cases to wearable tech, from novelties to serious productivity tools, if its available for home technology, you can probably get it for your desktop, laptop, smartphone and tablet. Over the next few pages, we round up some of the best techno-treats and fashionable fripperies available. groov-e SportBuds groov-e, www.groov-e.co.uk Price: £39.99/$49.99/43,99 € Do you like to watch videos or listen to music on your tablet while using your cross trainer, exercise bike or other such workout equipment? These sporting true wireless earbuds from groov-e feature an ear hook design to keep them in place while you work out and are rated IPX4 sweat resistant. Their carry case is a…

Unlike most of AVM’s range of wireless routers, the FRITZ!Box 4060 lacks a built-in modem. This means regardless of how your network interacts with the Internet, you can use the 4060 by connecting it to your existing modem, which was probably supplied by your ISP. Whatever your type of Internet connection (be it ADSL, fibre, cable or mobile data), even if your Internet Service Provider forces you to use their own modem hardware, you can switch off the router section of your ISP-supplied device and connect the FRITZ!Box 4060 instead. But what advantages does this bring? As you’d expect, the router’s wireless capabilities include compatibility with the new Wi-Fi 6 protocol, which gives faster speeds, and is much better at dealing with multiple, simultaneous connections. If you’re working on your…

Twelve South has a reputation for making excellent Apple peripherals that are both useful and decorative. Unfortunately, TimePorter is not such a device. An accessory travel case and charging stand for your Apple Watch, TimePorter is the same size and shape as a spectacle case but with a hole on the top for you to fit your watch’s charging cable. You have to supply your own – there’s no Apple Watch cable in the box. So what you’re left with is a metal case with space for your spare watch bands and a rubber interior frame for wrapping your charger. Is this enough to justify the price? Not really. You could just as easily keep your cable and watch straps in a real spectacle case (who doesn’t have a spare?)…

If you’re lucky enough to have a FRITZ!Box router with DECT compatibility, you can connect up to six wireless phones and position them anywhere in the house. They connect to the phone line through your router, so they don’t need to be plugged into a telephone socket. FRITZ!Fon C6 is such a phone and it’s had an impressive makeover. The body of the phone is pleasingly ergonomic and although it’s pretty minimalist in design, a clever interface makes it easy to access its unique features such as Internet radio, answer machine, email, podcasts, RSS feeds and even a baby monitor. If you have more than one FRITZ!Fon in the house, you can make internal calls between them. The new C6 model has an excellent hi-res colour screen and you can…

Risers for your computer or monitor aren’t exactly thin on the ground but as you’d expect, this model from Twelve South goes that extra yard with careful planning and design. As well as raising your iMac or external display to a more comfortable height, it features a handy space underneath for all your bits and pieces. The shelf, which is perforated for airflow, is the perfect size and shape for a Mac mini too. If you use Apple’s small form factor Mac with a monitor, Curve Riser is the ideal way to keep them tidy on your desk; saving space. Alternatively, use it for a USB optical drive, Thunderbolt hub, audio interface or just about anything else you can think of. The space underneath the riser is a good fit…

Inside the Pi 400 is a modified Raspberry Pi 4. It’s longer, spanning the width of the keyboard, with a large heatsink to dissipate enough heat for the overclocked processor. The Pi 4’s communication ports are spaced along the back of the Pi 400 keyboard, minus a second USB 2.0 port and a 3.5mm audio jack. TECH SPECS The Pi 400 has a slight advantage over the Raspberry Pi 4 in terms of its processing power, but it loses out in the overall memory department. However, the specs are an impressive Broadcom BCM2711 quad-core Cortex-A72 (ARM v8) 64-bit SoC, overclocked to 1.8GHz – and tests have shown that the Pi 400 can be further overclocked to a stable 2.2GHz. And there’s 4GB of LPDDR4-3200 memory available too. Not bad for…

The Pi Pico may be small, but it packs a decent punch. With it you can expand your electronics projects, and incorporate a whole new level of functionality that you weren’t able to before with the traditional Raspberry Pi units. PICO SPECIFICATIONS • 21mm × 51mm form factor • RP2040 microcontroller chip designed by Raspberry Pi in the UK • Dual-core Arm Cortex-M0+ processor, flexible clock running up to 133 MHz • 264KB on-chip SRAM • 2MB on-board QSPI Flash • 26 multifunction GPIO pins, including 3 analogue inputs • 2 × UART, 2 × SPI controllers, 2 × I2C controllers, 16 × PWM channels • 1 × USB 1.1 controller and PHY, with host and device support • 8 × Programmable I/O (PIO) state machines for custom peripheral support…

ASK AROUND The kit list required to set up a Raspberry Pi is pretty basic: keyboard, mouse, HDMI monitor, SD Card and an optional case. Many of these items you’ll already have, but don’t rush out and buy those you don’t. Ask around to see if anybody you know has spares. STEP 1 The most important thing you need is an SD Card. These are the storage cards commonly found in digital cameras. All modern Raspberry Pi boards, including the Raspberry Pi 3 and Pi Zero, use Micro SD cards but the older boards may use a larger SD Card. STEP 2 The SD Card plugs into the SD Card socket. On the Raspberry Pi 4, 3, and Pi Zero, you push the card in and pull it out. On…

In 2016, the Raspberry Pi Foundation started work on an x86 version of its popular Raspbian operating system. By the end of the following year, there was a link on the Downloads page and non-Pi owners could now install and use Raspbian in almost the exact same way as if they were in front of a Raspberry Pi. Since then, the Raspberry Pi Desktop, or as it’s correctly called: Debian Stretch with Raspberry Pi Desktop, has followed the same release path as its Pi-based sibling. However, there are some differences you need to be aware of prior to throwing your Pi away and opting for this version instead. The Raspberry Pi Desktop (x86 version) allows you to view the same desktop and pre-installed software as the Full Desktop version available…

PIXEL PIXEL stands for “Pi Improved Xwindow Environment, Lightweight”. It’s a lightning fast and energy saving desktop that looks good too. It contains almost everything you’ll ever need to work with the Pi 4. THE DESKTOP The PIXEL interface is a module that’s installed on top of the core OS. It has seen some improvements over the years, and with the release of the Pi 4 and Raspbian Buster, it now looks like this. THE PROGRAMS The programs that come pre-installed with Raspbian are easily located by clicking on the Raspberry Pi logo in the upper left corner of the desktop. Once there, you can select from the sub-menu categories, followed by the program name. PRODUCTIVITY You’ll notice that within the Main menu, there’s a category named Office. In here,…

REMOTE CONTROL The Raspberry Pi is easy to set up and use in projects around the home and, surprisingly, many of these projects don’t need a keyboard, mouse or a monitor; these are known as Headless devices. VNC lets you control a Headless Pi from another computer. STEP 1 You will first need to ensure that your Pi is connected to a keyboard, mouse and monitor, and is connected to your Wi-Fi router, before you attempt to connect to it remotely. Start by clicking on the Raspberry Pi menu, then scroll down to Preferences > Raspberry Pi Configuration. STEP 2 With the Raspberry Pi Configuration window open, click on the Interfaces tab, and ensure that the VNC option is Enabled. Click on the radio button next to Enabled to activate,…

VIEWING AND MOVING FILES You can move, manage and delete files using the Command Line but like all modern operating systems Raspbian has a program to help you manage your files. Discover how to use the File Manager app. STEP 1 Raspbian includes a great file management program called “File Manager PCManFM” or just “File Manager” for short. Click on the FileManager PCManFM icon in the Launch Bar or choose Menu > Accessories > File Manager. STEP 2 File Manager displays the folders in your Home folder (this should match your user name, ‘Pi’ by default). By default you should have Desktop, Documents, Downloads, Music, Pictures, Public, python_games, Scratch and folders. Double-click any folder to open it and view its contents. Click the Parent Folder icon or press Alt-Up Arrow…

STARTING PYTHON For those using the Pi 4 and new Raspbian, drop into a Terminal and enter: sudo apt-get install idle3. Older versions of Raspbian already have the official Python IDLE pre-installed. STEP 1 With the Raspbian desktop loaded, click on the Menu button followed by Programming > Python 3 (IDLE). This will open the Python 3 Shell. Windows and Mac users can find the Python 3 IDLE Shell from within the Windows Start button menu and via Finder. STEP 2 The Shell is where you can enter code and see the responses and output of code you’ve programmed into Python. This is a kind of sandbox, where you’re able to try out some simple code and processes. STEP 3 For example, in the Shell enter: 2+2 After pressing Enter, the…

COMMAND THE CODE Using the code we created in the previous tutorial, the one we named hello.py, let’s see how you can run code that was made in the GUI at the command line level. STEP 1 Python, in Linux, comes with two possible ways of executing code via the command line. One of the ways is with Python 2, whilst the other uses the Python 3 libraries and so on. First though, drop into the command line or Terminal on your operating system. STEP 2 Just as before, we’re using a Raspberry Pi: Windows users will need to click the Start button and search for CMD, then click the Command Line returned search; and macOS users can get access to their command line by clicking Go > Utilities >…

VARIOUS VARIABLES You’ll be working with the Python 3 IDLE Shell in this tutorial. If you haven’t already, open Python 3 or close down the previous IDLE Shell to clear up any old code. STEP 1 In some programming languages you’re required to use a dollar sign to denote a string, which is a variable made up of multiple characters, such as a name of a person. In Python this isn’t necessary. For example, in the Shell enter: name=”David Hayward” (or use your own name, unless you’re also called David Hayward). STEP 2 You can check the type of variable in use by issuing the type () command, placing the name of the variable inside the brackets. In our example, this would be: type (name). Add a new string variable:…

GOING GRAPHICAL You can draw simple graphics, lines, squares and so on, or you can use one of the many Python modules available, to bring out some spectacular effects. STEP 1 One of the best graphical modules to begin learning Python graphics is Turtle. The Turtle module is, as the name suggests, based on the turtle robots used in many schools, that can be programmed to draw something on a large piece of paper on the floor. The Turtle module can be imported with: import turtle. STEP 2 Let’s begin by drawing a simple circle. Start a New File, then enter the following code: As usual press F5 to save the code and execute it. A new window will now open up and the ‘Turtle’ will draw a circle. STEP…

1 This part of the code imports the necessary modules. The OS and Subprocess modules deal with the operating system elements of the program. 2 Each def XXX() functions store the code for each of the menu’s options. Once the code within the function is complete, the code returns to the main menu for another option. 3 This is part of the code that checks to see what OS the user is running. In Windows the CLS command clears the screen, whereas in Linux and macOS, the Clear command wipes the screen. If the code tries to run CLS when being used in Linux or macOS, an error occurs, which then prompts it to run the Clear command instead. 4 These are the options, from 1 to 12. Each executes…

HANGMAN.PY We’ve made a Hangman game board (the gallows) out of characters that can be displayed in the IDLE Shell, along with a huge bank of words to randomly choose from. QUIT() Since this is the last example in our Python code repository, we thought we’d go out with a bang and feature the hangman gallows being drawn with each incorrect guess of the word. Don’t worry if it looks misaligned in the text here, this is merely due to the differences between using the Python IDLE editor and pasting the code into a word processor (which formats things differently). There’s plenty you can do to improve, enhance and expand on what we’ve presented here. You can include a routine that returns an error if the user enters a number…

GETTING AROUND To drop into the Terminal, click on the fourth icon from the left along the top of the Raspberry Pi desktop, the one with a right-facing arrow and an underscore. This is the shell, or Terminal. STEP 1 First, you’re going to look at directories and the directory path. A directory is the same thing as a folder, however in Linux it’s always called a directory. These are placed inside each other using a “/” character. So when you see /home/pi it means the pi directory is inside the home directory. Enter: clear and press return to clean the screen. Now enter: pwd. This stands for Print Working Directory and displays /home/pi. STEP 2 When you log in to your Raspberry Pi, you don’t start at the base…

MANAGING FILES AND DIRECTORIES Now that you know how to create files, you’ll want to learn how to make directories, which are the same thing as folders, as well as move items around. If you are more used to working with a desktop interface, this can take a bit of getting used to. STEP 1 Enter: ls to quickly view all the directories currently in in the home location. Directories are created using the “mkdir” command (make directory). Enter: mkdir testdir to create a new directory in your home directory. Enter: ls again to see it. STEP 2 The “mkdir” command is different to touch, in that it doesn’t update the timestamp if you use it with a directory that already exists. Enter: mkdir testdir again and you’ll get the…

THE JOY OF TEXT You will come across a lot of text files in Linux and to be able to edit or create a text file, you need a good text editor. Linux has many but here are some in action on the Raspberry Pi. STEP 1 The first text editor for the Raspberry Pi is the default desktop environment app: Leafpad. To use, you can either double-click an existing text file or click the Raspberry Pi menu icon (in the top left of the desktop) and from the Accessories menu, choose Text Editor. STEP 2 From the Terminal there are even more options, although using the correct command, you can launch any of the desktop apps via the Terminal. One of the simplest, and a classic text editor that’s…

LOTS OF LINUX Linux is a huge and versatile command line language and there are hundreds of commands you can learn and use. Here are a few that can help you get more from your Raspberry Pi. STEP 1 The Raspberry Pi is a great little computer, so let’s start by getting some information. Enter: cat /proc/cpuinfo to view some details on your Raspberry Pi processors. If you have a Raspberry Pi 3 you will see four processors, along with the model name and other info. STEP 2 Remember that cat is used to list the contents of a text file, which is what cpuinfo is. There are other text files with system info available. Try “cat /proc/meminfo” to get information about your memory, “cat /proc/partitions” for information about your…

TERMINAL FUN All these commands are Linux-based, so not only can you use them on the Raspberry Pi but also on any of the Debian-based Linux distributions. STEP 1 The first command we’re going to use is sl, it’s not installed by default so enter: sudo apt-get install sl. The command can be run with sl and when executed displays a Steam Locomotive travelling across the screen (hence ‘sl’). Entering: LS (note the upper case) also works. STEP 2 Fans of Star Wars even get a fix when it comes to the Terminal. By linking to a remote server via the telnet command, you can watch Episode IV: A New Hope being played out, albeit in ASCII. To view this spectacle, enter: sudo apt-get install telnet, followed by: telnet towel.blinkenlights.nl…

TOP 10 COMMANDS These may not be the most common commands used by everyone but they will certainly feature frequently for many users of Linux and the command line. cd The ‘cd’ command is one of the commands you will use the most at the command line in Linux. It allows you to change your working directory. You use it to move around within the hierarchy of your file system. You can also use chdir. ls The ‘ls’ command shows you the files in your current directory. Used with certain options, it lets you see file sizes, when files where created and file permissions. For example, ls ~ shows you the files that are in your home directory. cp The ‘cp’ command is used to make copies of files and…

FILM NIGHT First off, what is a media centre? Basically, a media centre, with regards to what we’re talking about here, is a computer that’s capable of playing, possibly recording, and even sorting a media collection made up of videos, music and images. It’s a home cinema system, connected to a TV that will stream media from online, or from a network attached storage device, or storage connected directly to the computer itself. A media centre is often capable of sorting your collection of videos, music, and photos into a logical order, either by album, genre, year, alphabetically, or some custom setup. It can connect to the Internet and display information regarding the media, such as album cover, movie poster, location an image was taken, or even connect to an…

TROUBLESHOOTING YOUR RPI The Raspberry Pi is a surprisingly stable bit of kit, but there is always the chance of encountering problems. If you’re really stuck there are apps available which can help diagnose problems on the RPi. RED POWER LED IS BLINKING A blinking red power LED indicates problems with the power supply. On model A and B, it is hard-wired to the 3.3V power supply rail. If it is blinking, it means the 5V power supply is dropping out. Use a different power supply. On the model B+ and also the A+, the circuit has been improved to give a much more reliable warning of poor power quality. The red power LED is wired to an APX803 supervisor which kicks in when the 5V power supply drops below…

It’s amazing how far display prices have fallen, while their quality continues to rise. Take this one, for example. It’s a specialist, quad hide-finition (QHD) gaming monitor with a giant 31.5-inch screen. It runs at 165Hz, has a 1ms response time and a 300 nits rating, yet it costs well south of 400 notes. The AOC CQ32G2SE Gaming Monitor features a tool-free setup. You can get it up and running out of the box in five minutes flat, without having to root around for the right spanner or screwdriver. Just snap the display onto the stand and fit the foot using a finger-turned screw. It’s no hassle at all. Around the back of the display are two HDMI ports and a DisplayPort. There’s no Thunderbolt connectivity (though you can use…

If you’re serious about your gaming, you have to get a decent controller. A joypad that feels comfortable in the hands, with all its buttons and inputs within easy reach. Something with a full range of controls, including four face buttons, a D-pad, two analogue sticks and twin shoulder buttons; a now-standard setup as used by recent Xbox and PlayStation consoles. A joypad like the GameSir G4 Pro. You can connect your G4 Pro to a Windows PC using a dongle that fits in the back of the joypad when not in use or via the USB-C charging cable supplied. Unfortunately, it’s not Mac-compatible and nor can it be used with an Apple TV set-top box. You can use it with your smartphone or tablet over Bluetooth and even with…

WaterField Designs makes deluxe bags for connoisseurs. They’re not cheap, but the quality is outstanding. You could use a WaterField bag every day of your working life, then give it to your grandchild and it would still be in good condition. This particular WaterField Designs product, the Zoom Crossbody Laptop Bag, is available in two sizes. The Compact version fits devices up to 11 x 8 inches, and is ideal for your tablet Pro and a Magic Keyboard. The Tall version can handle notebooks up to 12.75 x 8.75 inches such as Apple’s 13-inch range, including the new M1-powered MacBook Pros. It’s available in a range of colours, and sports a comfortable shoulder strap that holds your Apple gear in a portrait position. The main body of the bag is…

If you remember the review we did of the devolo Magic 2 Wi-Fi Starter Kit back in Issue 2, you know that powerline adapters are a great way of extending the reach of your cabled and wireless network using your house’s electrical wiring. A powerline setup consists of at least two plugs, which fit in your household mains sockets. By connecting one of them to your router using a supplied Ethernet cable and plugging the other into any mains socket in the house, you create a cabled connection between your router and the second adapter. This unit can offer a wireless access point for your network, Ethernet ports for cabled connectivity, or both. devolo’s Magic 2 LAN Triple powerline adapter starter set doesn’t offer Wi-Fi access, but it does have…

The Raspberry Pi is a British built low cost computer that enables everybody to learn computing, start programming and explore basic electronics. It’s the size of a credit card but capable of running a full operating system and doing everything a desktop does. More importantly, with the Raspberry Pi you install your own operating system, connect all your devices and create your own programs using languages like Scratch and Python. There’s no case so you can hook up electronic circuits to the pins and control them to get input and output, so you can hack together electronic projects at home. Setting up a Raspberry Pi is pretty simple, and throughout this book we’ll take you step-by-step from unboxing your Raspberry Pi to setting it up and getting started. There are…

Released in November 2020, and while the UK and most of the world was still in lockdown, the Raspberry Pi 400 came at a time when we were beginning to feel like there was no end to the pandemic and the restrictions it brought. Initial thoughts were that the Pi 400 was a new small-board computer, in a similar vein to the Pi 4 and its predecessors. However, we were quite wrong. The Pi 400 is a very different beast to that of its siblings. Rather than the naked board we’ve seen in the past, the Pi 400 came as a complete keyboard package, with the Pi’s familiar ports lined up along the backplate of the keyboard. This in itself was remarkably reminiscent of the home microcomputers of the 80s,…

The Pico is something entirely different from the Raspberry Pi Foundation’s usual releases. Whereas the Raspberry Pi, now on version 4, is a small computer, and even the Compute Module and the Pi 400 are still just computers, the Pico is actually a microcontroller. A microcontroller is a processing unit that’s designed to work with programmable peripherals, and has input and output modules alongside a small amount of memory and storage capabilities. The processors are often scaled down, compared to the processor on a Raspberry Pi, or even inside your desktop computer, but powerful enough to complete basic tasks. Examples of a microcontroller in action can be found inside a washing machine, or traffic lights. A washing machine has no need for a quad-core processor, 8GB of memory, and the…

PICO POWER! Here are ten ideas and projects that you could look into achieving with your Raspberry Pi Pico. You may need to enhance your electronics skills, but there’s plenty of help online if you hunt around for it. ROBOTICS Can you create a Pico-powered microcontroller to work different aspects of a robot? You could use the Pico to drive the robot, or control an element on it depending on where it is in your home. TEMPERATURE GAUGE The Pico’s RP2040 processor has a built-in ADC to convert analogue to digital signals. It also has a built-in temperature sensor, so it’s possible to utilise the Pico as a temperature gauge. MOTORS In addition to the robotics idea, a Pico can be used to control motors. Again, depending on the input…

THE POWER OF PI With many different versions across four generations of models, the Raspberry Pi is certainly a busy little board. But while each Pi offers something slightly different, for the newcomer it’s a confusing medley of hardware specifications and model numbers. Which, Pi, then is best for you? Naturally, that questions depends greatly on what it is you want to do with your Raspberry Pi. If you have a particular project in mind, such as a home media centre server, then you’d probably opt for the more powerful and hardware-capable model of Raspberry Pi. If you want to setup a wireless security camera project, using the Raspberry Pi as the core hardware, then perhaps the Pi Zero W would be a better fit. To begin with, let’s have…

GETTING TO KNOW NOOBS The easiest way to get up and running is to use NOOBS, a software program created by the Raspberry Pi Foundation. You can buy a NOOBS SD Card from Raspberry Pi but it’s easy to make your own with an old unused SD Card (8GB recommended). STEP 1 We’re going to use a utility called SD Card Formatter 5 to erase the SD Card with correct formatting. You can download this app from https://www.sdcard.org/downloads/formatter_4/. Click Download SD Formatter for Mac and Accept. Click the SDFormatter.pkg file in your Downloads folder and follow the instructions to install the app. STEP 2 Use an SD Card of at least 8GB capacity to install the operating system on your Raspberry Pi. The card needs to be formatted, which will…

10 THINGS TO DO WITH X86 RASPBERRY PI OS There’s just as much you can do with this version of Raspberry Pi OS as with the dedicated Pi version. Here’s ten great projects, and things to do with Debian Buster with Raspberry Pi Desktop. CODING This version of Raspbian apes the Full Desktop version for the Raspberry Pi, so that means it comes with all the necessary programming languages out of the box. Learn Python, C++, use the HAT emulator, and even learn JAVA. It’s all there under the Programming menu option. HARDWARE Hook up a Pi Zero without an SD installed, and select GPIO Expansion Board from the options, and you will be able to talk to the Zero’s 40-pin GPIO via the likes of Python or Scratch. By…

USING TERMINAL Despite its graphical PIXEL interface, Raspbian is a Linux operating system and this means you’ll spend a lot of time working with text commands. Using the command line is an important part of learning to use a Raspberry Pi computer. STEP 1 By default the Raspberry Pi boots directly into the PIXEL interface. Here you use a visual metaphor, files, buttons and so on, to make changes to your computer. The command line is where you control a computer by entering text commands. Click Terminal in the Menu bar to view the console. STEP 2 You can enter commands into the Terminal to make changes to the computer. This works alongside the PIXEL interface. Enter: mkdir Desktop/testfolder and press return. Notice a new folder appears below the Trash…

ADVANCED PACKAGING TOOL Add / Remove Software is great for finding and installing software but most of the time you manage apps on a Raspberry Pi using a program called APT (Advanced Packaging Tool) using the apt command. STEP 1 To manage the apps on your Raspberry Pi you’ll need to use a tool included with Raspbian called APT (Advanced Packaging Tool). APT is a command line tool so you need to either start your Raspberry Pi in the command line or click on the Terminal icon. STEP 2 The command used to control packages in Raspbian is apt Type apt into the terminal and press Return to get a description of what the app does. The instructions tell us that the “most frequently used commands are update and install”.…

GET TO KNOW GIMP Your Raspberry Pi can display images with its built-in Image View app but for any image editing you’ll need GIMP (GNU Image Manipulation Program). GIMP is a powerful software package for photo editing and is a great tool to install on your Raspberry Pi. STEP 1 Open terminal and enter: sudo apt install gimp to download and install the GIMP package. An alert will appear saying: “after this operation, 117 MB of additional disk space will be used. Do you want to continue [Y/n]?” Enter: y and press Return. GIMP will now be installed in Raspbian. GIMP is a lot larger than most programs you’ll install, so the installation takes longer. STEP 2 When the installation has completed you will find GIMP under Menu > Graphics…

IT’S ALL MATHS, MAN You can get some really impressive results with the mathematical powers of Python; as with most, if not all, programming languages, maths is the driving force behind the code. STEP 1 Open up the GUI version of Python 3, as mentioned you can use either the Shell or the Editor. For the time being, you’re going to use the Shell just to warm our maths muscle, which we believe is a small gland located at the back of the brain (or not). STEP 2 In the Shell enter the following: You can see that Python can handle some quite large numbers. STEP 3 You can use all the usual mathematical operations: divide, multiply, brackets and so on. Practise with a few, for example: STEP 4 You’ve…

MASTERING MODULES Think of modules as an extension that’s imported into your Python code to enhance and extend its capabilities. There are countless modules available and as we’ve seen, you can even make your own. STEP 1 Although good, the built-in functions within Python are limited. The use of modules, however, allows us to make more sophisticated programs. As you are aware, modules are Python scripts that are imported, such as import math. STEP 2 Some modules, especially on the Raspberry Pi, are included by default, the Math module being a prime example. Sadly, other modules aren’t always available. A good example on non-Pi platforms is the Pygame module, which contains many functions to help create games. Try: import pygame. STEP 3 The result is an error in the IDLE…

NUMBERGUESS.PY Copy the code and see if you can beat the computer within five guesses. It’s an interesting bit of code that can be quite handy when your implementing a combination of the Random module alongside a while loop. 1 Although this is a reasonably easy to follow program, there are some elements to the code that are worth pointing out. To begin with, you need to import the Random module, as you’re using random numbers within the code. 2 This section of the code creates the variables for the number of guesses used, along with the name of the player, and also sets up the random number between 1 and 30. If you want a wider range of random number selection, then increase the number=random.randint(1, 30) end value of…

EPICSCROLL.PY We’ve used the poem Cimmeria by Robert E. Howard for the code’s scrolling text, along with a dramatic black background and red text. We think you’ll agree, it’s quite epic. A Long Time Ago… The obvious main point of enhancement is the actual text itself. Replace it with a list of credits, or an equally epic opening storyline to your Python game, and it will certainly hit the mark with whoever plays it. Don’t forget to change the screen resolution if needed; we’re currently running it at 800 x 600.…

LOOKING AT FILES Operating systems are built on files and folders, or directories if you prefer. While you’re used to viewing your own files, most operating systems keep other files out of sight. In Raspbian, you have access to every file in the system. STEP 1 We’ve already looked at “ls”, which lists the files in the working directory, but you are more likely to use a command like “ls –l”. The bit after the command (the ‘-lah’) is known as the argument. This is an option that modifies the behaviour of the command. STEP 2 The “-l” argument lists files and directories in long format. Each file and directory is now on a single line, and before each file is a lot of text. First you’ll see lots of…

USING THE MOVE COMMAND In Linux, renaming a file is simply moving it from one name to another and copying a file is moving it without deleting the original. Don’t panic, it’s quite easy to master. STEP 1 Before we can move anything around, we need to have a few test items in our home directory. Enter: touch testfile and mkdir testdir to create a test file and test directory in your home directory. Enter: ls to check that they are both present. STEP 2 Files and directories are moved using the mv command. This is different to the commands we’ve looked at so far because it has two arguments (remember Linux command line is command, option, argument). The first argument is the source (the file or directory to be…

WHAT IS A USER? An important part of using Linux is the concept of users and understanding which user you are and which group you belong to. Like all modern computers, you can have multiple user accounts with each having different levels of access. STEP 1 The first thing you need to do is get a concept of which user you are. Enter: whoami into the command line and press return. It should say “pi” (unless you set up your account name differently during setup). The “whoami” command might seem a bit simplistic, but it comes in very handy sometimes. STEP 2 When you are working in Linux, from time to time a ‘Permission denied’ error will occur, typically when you try to create, edit or execute (run) a file…

MORE FUN, YAY Since the Terminal session is already open, and your keyboard digits are nicely warmed up, here are another two pages of Terminal nonsense. STEP 1 Remember the old ZX Spectrum days of computing, when you could type in 10 print “Hello”, 20 goto 10 and Hello would list down the screen? Well, in Raspbian you can do the same. Simply enter: yes followed by some text, i.e. yes Raspberry Pi is ace. It keeps going until you press Ctrl+C. STEP 2 The Matrix was one of the most visually copied films ever released and there’s even a version of the Matrix code available for Linux. Install it with: sudo apt-get install cmatrix. When it’s done enter: cmatrix and follow the white rabbit, Neo. Unlike the real Matrix…

TO BOLDLY GO… Indeed, the ISS is something most of us consider as a worthy example of what can happen when we work together. NASA, among other agencies, uses a wealth of Python code onboard the ISS to help automate routines, alongside its function as an in-between link to translate code from one language to another, and then into a human-readable format. If you’re considering a career in space, then learning Python is a must have skill. While we’re not able to fill you in on all the details regarding the code the ISS utilises, we can look at a fun Python script that will track the ISS, display the number of astronauts on board, and update the station’s current latitude and longitude every five seconds, while also displaying your…

ASCII ANIMATION Let’s assume you wanted to create an animated ASCII Happy Birthday Python script, with the words Happy and Birthday alternating in appearance. Here’s how it’s done. STEP 1 First we need to create some ASCII-like text, head over to http://patorjk.com/software/taag. This is an online Text to ASCII generator, created by Patrick Gillespie. Start by entering Happy into the text box, the result will be displayed in the main window. You can change the font with the drop-down menu to the side of the text box; we’ve opted for Big. STEP 2 Now, on your computer create a folder in your Python code directory (call it Test, for now) and open either Leafpad for the Raspberry Pi or, if you’re using Windows 10, then Notepad. Click on the Select…

Welcome to the launch issue of Tech Shopper Magazine. In this new publication from Papercut Ltd, our team of technology experts combine their many, MANY years of experience to craft the ultimate buyers guide that covers all major formats. In this first issue, we take an in-depth look at all sorts of gadgets and gismos for your Apple gear. If it’s a head turner, for good or bad reasons and is compatible with a Windows, Android, Samsung, iPhone, iPad or Mac, we’ve covered it inside. In fact, this magazine is 100% reviews and previews as we devote the whole magazine to covering the latest software, add-ons and more. And we haven’t neglected software either. We cover a wide range of apps and games for all your tech gear. In the…

This wireless charger powers three of your Apple devices at once. The vertical stand on the left holds – and charges – your Apple Watch. The charger is built-in. You don’t have to use the one that came with your watch like you do with some charging stands, so you can keep that for travel. In front of it is a recessed area where you place your AirPods (2nd gen or Pro). On the right of the unit is a regular wireless charger for your smartphone, as long as it’s wireless-charging compatible. Three chargers in one. Unfortunately, there’s no USB port around the back for cabled charging. The charger is available in both black and white. The black model has a premium Ultrasuede fabric finish, while the white one boasts…

You can’t fault the price. For less than 60 notes, the Kami Indoor 360 Smart-Home Camera offers 340° rotation and 90° tilt, dual band wi-fi, two-way audio, night vision and 1080p high definition recording. It’s not at the expense of quality either. It’s robust and stylish, with an understated profile that sits discreetly wherever you wish to position it; and its recordings are sharp and smooth. It has to be used indoors, of course. The camera is not weatherproof or waterproof, so it cannot be set up outside. It has to be reasonably close to a plug socket too. A long USB lead is supplied so you can power it from the mains plug provided or a computer’s USB port but there’s no battery option. The Kami Indoor 360 Smart-Home…

Your brand-new smartphone might well be the pinnacle of mobile phone gaming but is your controller up to speed? Do you even have a controller? If not, this amazing, pocket-sized add-on could be just what you’re looking for. The Kishi folds down when not in use for easy storage and portability. When opened up it stretches out to accommodate smartphones of all sizes. A Lightning connector plugs into your phone and a through-port lets you plug in your Lightning cable and charge while you play. There’s no need to cut your gaming short because your smartphone’s battery is almost drained. There’s a free app too but this is just for firmware updates and information; there’s no heavy setting up to do. Its comprehensive control set will prove familiar to anyone…